Bee Vault: 3D-Printable Acrobee Box
I’ll admit it; I’m a little bit NewBeeDrone obsessed, so when the idea came to me that I could turn the NBD logo into a locking mechanism I just couldn’t get it out of my head until I’d turned it into reality. This box is the result!
The Bee Vault is a container designed to hold two NewBeeDrone Acrobee BL 65mm drones as well as 25 batteries and spare parts. The lid has print-in-place locks in the shape of the NBD logo for added style.
There are also variants of the insert, designed for brushed whoops, or you can mix and match to store one of each.
There is 0.6mm clearance between the locking parts, so it should be an easy print. No supports to be used. All that is required is a good flat bed with good adhesion. Don't use a brim unless you really have to, since you’ll have to clean it up.
You can download the files here and 3D print your own, if you do be sure to share it in the Hive, we love to see your prints!